|
|
|
|
|
|
|
Titan's warp tying machine was exhibited in the International Exhibition of Brussels in 1935. The operation and performance of this machine was so spectacular that it obtained the first prize at the exhibition. During the following years thousands of Titan warp tying machines were sold around the world and the machine was recognised for its high performance and its maximum reliability. TITAN engineers are working, keeping in mind all the technological developments that are appearing in weaving and they have been perfecting their tying equipment to be at the same level as the modern weaving machinery also for the new types of filament and spun yarns. TITAN is the only warp tying machine with double selection of each thread. This characteristic confirms the superiority of TITAN machines regarding the detection of double threads in the warp. When the machine detects a double thread, it stops automatically and assures a perfect knot without time-consuming repair work afterwards. The current TITAN warp tying machine is a modern, high performance, electronic and programmable machine with the ability to tie practically all types of yarns by types and counts.
Features - Universal tying form, with and without lease. - Two consecutive selections of each warp thread. - Unique-twin-selector-system that ensures the separation of double threads in the lease. - Single and double knot. - Adjustable knot ends. - Electronic double thread detector in the lease. - Knots visible during tying. - Programmable repeats or colour changes in both sheets, stopping at control points to achieve perfect tying. - Software C, with programming of irregular lease, with 100% control of the defects in the lease (available for each model). - Working direction from right to left (R) standard version or from left to right (L) special version.
Models - KM 2000 L/R single knot. - KM 2000 L/RS single knot with adjustable knotends. - KM 2000 L/RD single and double knot. - KM 2000 L/RDS single and double knot adjustable knotends. - KM 2000 M mechanical type.
Technical characteristics: Range of application: From NM 0,5 to NM 1000 From 18.000 den to 9 den From 2.00 tex to 1 tex Types of yarns: cotton, wool, silk, synthetic threads and blends, bouclé, lycra. Effective tying speed: 50-600 knots/minute depending on yarn characteristics. Knot tail length: adjustable 7-20 mm. Input voltage: 110-240 V, AC, 50 or 60 hertz. Weight: approximately 14,50 kilos. Standard accessories: Aluminium Box with transportable truck. Operating manual and spare parts catalogue. Standard tools and a selection of spare parts.
Stands: Type KS6 (L/R), models from 1300 mm to 3900 mm ( in steps of 300 mm ) Different size stands available.
Stand Features: - standard stand version reinforced. - The angle between the two sheets can be adjusted during tying. - From 2800mm in width, the stands are available in two versions: - A/ in only one unit with mechanism to open up and close for both sides. - B/ with rods divided in two parts.
|
|
|
|
||
|
|
||
|
|
||
 |
